ng one month prior to the seminar. Rauwendaal Extrusion
Engineering, Inc. reserves the right to cancel one or more seminars.
Should this occur the attendees will be notified. We also reserve the
right to substitute instructors. We do not take any responsibility for
penalty fees or any other cost that may be incurred due to cancellation.
We recommend that you book travel with refundable fares. Registrants
who fail to attend are liable for the fees of the course registered for.
Location and Accommodations T&P Extrusion & Auxiliary:
These will be held at Harrel, Inc. 16 Fitch St, E. Norwalk, CT 06855, Phone:
(203) 866-2573,
Fax: (203) 866-1483
Attendees are responsible for making their own hotel reservations. Hotels
nearby: Norwalk Inn, 99 East Ave (800) 303-0808, www.norwalkinn.com, Club
Hotel by Doubletree, 789 Connecticut Avenue (203) 853-3477, Four Points Hotel
by Sheraton, 426 Main Ave (203) 849-9828 Four Points has a free shuttle that
will take you anywhere in a 5 mile radius. Contact us for an extensive
list of nearby hotels.
Hours for T&P Extrusion Seminar:
Check in/Registration: 8.00-8.30am first day, seminar hours 8:00-4:00pm,
1.00pm last day
Location and Accommodations for Foam Extrusion & Die Design:
These will be held at the Sheraton Sand Key Resort, www.sheratonsandkey.com.
A block of rooms has been reserved at this hotel for a special rate of $209.00
a night. After Feb 4th, our room block is released and rooms are on
a space available basis at the regular hotel rate. Phone: 727-595-1611.
Attendees are responsible for making their own reservations. Please
mention Rauwendaal Extrusion Engineering, Inc. Seminars to receive the discount
rate. Space is limited so early reservations are encouraged. If
you have problems getting a room, please contact us for recommended hotels
close by.
Hours for Foam Extrusion & Die Design
Check in/Registration: 8.00-8.30am first day, seminar hours 8:00-4:00pm,
1.00pm last day
|
| |
|
| |
|
|
|
